}
T
3
03
J
.00
186
girders each with a plate floor running right across as per sketch and a handrailing on outside.
4.
Sufficient service bolts should be sent out for the 100 foot span and one 20 foot span.
5. I am in receipt of copies of specification for rails
and fastenings and note that you are adopting a different pattern fish plate and fittings from that originally sent
out.
As I presume it is an improvement I am putting the new pattern into the main line and keeping the old pattern for sidings. The adoption of a new pattern however will be a
serious inconvenience when asking for renewals.
6.
I brought to Mr.Barry's notice when here the
standard dimensions isued by the Board of Comunications
Pekin with reference to the coning of the tyres of the
driving wheels of locos. The Chinese type shews these
tyres flat but it is the usual practice to cone them and
to tilt the rail to a cant of 1 in 20 approximately. Barry advised me to adze the sleepers to a cant of 1/8 inch
in the width of the flange. This I have started.
PROGRESS REPORT
Mr.
7. China New Year holidays interfered with the progress very much this month, no attempt was made to keep any work
going except on the Tunnels.
8. In Kowloon Station Yard the quantity done during
the month dropped to only 580,000 cubic feet. The coolies
came back to work very slowly the rock drillers especially
being very behind hand. Very little was done on the sea
wall.
is
9.
the
On the Taip holidays did not have so much
Was
@ffect
-5
No comments yet.
Private notes are available after approval.